How to connect speakers to a computer 🥝 in which jack or socket

A sound output device is an integral component when working with a computer. Usually connecting such devices does not cause any problems at all, but what should I do if problems still arise? How to connect speakers on a computer without problems? No sound, do not turn on - this is the most common problem when pairing the audio system with a PC. But what could be causing the problems? How to setup? What to do if they do not play sounds and music does not play? It is necessary to understand. In order to find a solution to the problem, you need to get acquainted with the causes of this problem. There can be a lot of options, and you need to know about each of them. Today we will talk about six reasons for the lack of sound.

to contents ↑

Broken speakers

Checking the integrity of the audio system is the first thing the user should pay attention to:

• There are such incidents when the user in a hurry just forgets about the wires.
• There is a high probability that the connection is incorrect. In other words, the wires are connected through the wrong input. The bottom line is that the audio card of a personal computer has several conclusions: for recording devices and for audio output devices. The microphone output is pink, and the speakers green, and they connect to the same color. Focus on this so as not to confuse anything.
• Also, often the entrances could simply be shaken due to frequent operation. To fix this, just correct them. At the same time, it would not hurt to clean the connectors from dust.
• Look at the front panel of the audio equipment. If the LEDs do not light, then the speakers themselves are not powered. Sometimes users just forget to turn on the device.

Of course, all of the above problems are elementary, but most often the problems are associated with just this.

to contents ↑

In the settings, the sound is turned off or turned off

How to install sound on a computer? Perhaps the problem lies in the settings of the operating system. To check this:

1. Press the “Start” key and go to the “Control Panel”. There you need to find the “Equipment and Sounds” section.
2. Now you need to go to the “Sounds” tab. Your audio device that is connected to the computer should be displayed here. Select the desired speakers with the mouse cursor and open their properties.
3. Before you should expand the tab “General”, in which you need to make sure that the devices are defined and enabled.
4. Next, go to the “Levels” tab. There will be displayed the current volume gain, which should be more than 80-90%.
5. Go to the “Advanced” tab and activate the sound check. If you did not hear anything, then save the settings and move on.
6. Try returning to “Volume Settings” and look at the sound level. It may be turned off or reduced to a minimum.
7. Right-click on the speaker shortcut, which is located in the lower right corner near the time. Check the current volume level there.

Important! Do not forget about the columns themselves. There is a possibility that the volume control is set to a minimum.

to contents ↑

Drivers

How to install speakers on a computer if they are already connected to it? There may be no sound due to the fact that the appropriate drivers are not installed on your PC. To determine if the correct driver version is installed:

• Visit the “Device Manager” located inside the control panel. You need the “Sound, gaming and video devices” tab. If the audio card is connected to the computer, then it should be displayed here.
• If there is a yellow or red icon opposite the devices, then the driver is faulty or completely absent. We recommend using the “Everest” program. With it, you can find out the model of your board and download the necessary software for the speakers.
• It happens that the card is installed, but the Windows operating system does not want to see it. The root of this problem can be anywhere. It is possible that the device is malfunctioning or incorrectly connected.

Important! The best way is to clean the system unit from dust and blow out the slot. In other words, the problem is related to the hardware of the computer, and if cleaning does not help you, then we recommend using the services of a specialist.

to contents ↑

Other problems

If you still haven't resolved the issue, then check out the other less common “sources” of sound problems:

• You may not have codecs on your personal computer. Try downloading and installing the “K-Lite Codec Pack”. Complete with codecs you will also receive a serviceable player.
• Incorrect BIOS setup. Try restarting the PC and pressing F2 or Del while turning it on. You will see a BIOS menu in which you need to find the “Hardware” tab (the name of the tabs depends on the BIOS version) and turn on the sound card if it was not turned on. Save the settings and start Windows.
• Virus files or malware. It happens that the virus interferes with enjoying your favorite music. The solution here is quite simple - you need to use any antivirus program.

to contents ↑

Stock footage

This information should help you install the speakers on your computer. Take your time and be careful, then you will definitely succeed.