How to connect speakers from a home theater to a TV?
Very often, the speakers that are built into the TV lg, samsung, etc., are not enough to view. Is there a solution to this problem? Of course. You can achieve the required volume with the help of good devices, which you need to choose wisely and connect. How to connect speakers from a home theater to a TV? - We will deal with this in this article.
to contents ↑Speakers and wiring diagram
First you need to deal with the device of the connected device itself. There are two types of acoustics:
- Active type. Such speakers work with an amplifier, which positively affects the sound quality.
- Passive. In such devices there is no amplifier.
You can connect any type of device to the TV. Let's talk about each of them in more detail.
to contents ↑Active type devices
How to connect speakers from a home theater to a TV? The design of the TV does not allow you to install decent speakers inside. But nothing prevents you from connecting any external device that can output sound. You can use any kind of equipment, be it gadgets for a laptop, personal computer or home theater.
In any modern TV, there is a special socket that allows you to connect the TV to audio output devices. A powerful amplifier built into the speakers of the active type only simplifies the connection task. The power supply of such devices is carried out using the most ordinary network - no additional manipulations are required.
External speakers are easily connected directly to the TV - you do not have to purchase additional sets of connecting wires or adapters.
Each socket, which is located on the back of the TV, has its own designation. Labeling helps determine the purpose of each of them.
In order to connect gadgets, you must follow the following instructions:
- Find sound jacks that are red (pink) and white. The labeling of these inputs is called Audio-R (white) and Audio-L (red).
- Connect all devices and start using them.
Important! You are the lucky owner of Samsung TV, but at the same time, due to the lack of software, you do not have the opportunity to watch online TV? The solution to this problem will be the installation of a flash player. Click on the direct link and you will learn about how to install flash player on samsung tv.
Passive Speaker Type
Such devices work without using a built-in powerful amplifier. How to connect speakers from a computer to a TV using a cable? First you need to connect the speakers to a pre-selected amplifier, and already connect it directly to the TV.
Connecting elements are included with the equipment, but if you do not have those available, then no one bothers you to purchase them:
- It is necessary to check the values of the output resistance of the amplifying element. It must have a nominal value, which will correspond to the resistance (R) of the columns.
- Also do not forget about polarity. The left channel must be connected to the left column, and the right channel to the right.If you make a mistake, the sound quality will be unsatisfactory.
Important! Remember that the power of the “amp” must be at least thirty percent of the same parameter used sound output devices. The wire must satisfy the following condition: the cross-sectional area (S) must be at least one square centimeter. Cable thickness ensures reliable connection.
Mini jack
Some equipment has a familiar “tulip” or “mini-jack” connector. To connect the stereo system use a special AV-class receiver, which requires an additional cable. This method of connection is the most common among users.
How to connect speakers from a home theater to a TV? There is another way, which will be discussed below.
HDMI cable
Modern TVs have an HDMI connector. Connection using such a cable will help to get a very high-quality sound, but not all audio systems have an appropriate input for such a cable. But this question has a solution - special adapters are sold in equipment stores that you can use for this method.
Important! If you purchased a TV with Smart function and it does not show all the channels, you may have connected it to the Internet incorrectly. Read in another our article about how to connect internet to your smart tv.
Using a tape recorder or radio
You can get a decent sound using the music center or other music playback devices. In order to use this method, you must connect a TV and a music device with a special cable, and connect the device itself to the speakers.
For this method, you need to use the “tulip” or TRS. If you have problems connecting, we recommend using an adapter.
Important! Remember that the signal is output from the TV. That is why you need to connect to the connector that is responsible for the output. Such connectors are marked OUT.
To exclude connection errors, we recommend that you use the attached instructions for the device you are using.
Small external audio system
Are you still unhappy with the sound quality? Then use the compact system, which includes several speakers and a subwoofer. The sound will be much better than using the same tape recorder.
In order to connect the system, you must use the Scart connector, which is installed on the back of the device. The adapter for the “tulip” or the familiar “mini-jack” will help you with this.
to contents ↑Important! Have you decided to install digital television and don’t know how to properly set up channels? Our experts will help you with this. Check out another article on our website about how to tune digital channels on a TV.
Stock footage
Now you know how to connect speakers from a computer to a TV, and not only from a computer. Following the instructions in this article and the manufacturer's recommendations, you can easily get the sound you need.
(No ratings yet)
Loading...
