How to disassemble the remote control from an LG TV?

Sometimes when switching channels, you may notice that the buttons do not work well. This is a signal that the device needs to be cleaned. As a rule, the reason for the remote control malfunctioning is the remnants of food, and sometimes the liquid spilled on it: tea, juice or coffee. Of course, you need to eat in specially designated places, but the temptation is still great. So, we’ll look at how to disassemble the remote control from an LG TV so that you can easily switch channels and change TV settings without any nerves when you want it, quickly and easily.

to contents ↑

Stage 1

To get started, study the remote control itself (how the back cover is fixed). The further procedure will be as follows:

  • Open the back cover.
  • Remove the batteries and see how the mounting screws are located in the compartment.

Important! They are small in size, you can unscrew them using a Phillips screwdriver.

  • Loosen the screws.
to contents ↑

Stage 2

Using a plastic card, gently pry the cover off. Next, swipe the card along the entire outline of the case. Then, with extreme care, remove the battery contacts from the grooves.

to contents ↑

Stage 3

After you removed the back cover, pay attention to how the board is fixed:

  • If it is set on cogs, just unscrew them.
  • If it is fixed with latches, then you need to carefully open them.

to contents ↑

Stage 4

Pay attention to how the IR diode is located in the socket to understand how to further disassemble the remote control from an LG TV, Philips, or any other model:

  • In most cases, it is not fixed at all.
  • If it is locked in the slot, remove it. Be very careful when doing this. Then remove the board.
to contents ↑

Stage 5

Removing the rubber buttons is quite simple:

  • Shake them out of the nests.
  • If they do not shake out, then click on them from the front side.

Now you can do what you disassembled the device for - cleaning it. And it is much easier.

You may ask: how to disassemble the remote control from a Sony TV? Similarly, since the devices are arranged on the same principle. Using the instructions above, you will successfully complete the task.

to contents ↑

Remote Control Cleaning

In order to clean the device from contamination, prepare such devices:

  • Alcohol or alcohol-containing liquid.
  • A small brush with soft nap.
  • Clean pieces of soft cloth.

Using this kit, you can, without disassembling the device, carry out external cleaning every week.

Important! To ensure that the PU assembly does not cause difficulties, lay out the parts in the order they were removed. If it was not possible to restore the working state of the device, find out from our other article, how to choose a remote control for the TV.

to contents ↑

Stock footage

In the future, try to keep the appliance away from food and drinks. So that the remote control is not very dirty, get a special cover for it. It will protect the device from pollution. In this case, the question of how to disassemble the remote control from a Philips TV, LG or Sony will not worry you too often.

1 star2 stars3 stars4 stars5 stars (No ratings yet)
Loading...
Adblock detector

Wardrobe

Electronics

Wash