How to remove glass from a phone 🥝 replacing a protective glass on a smartphone

The main function of the glass of any gadget is to protect the touchscreen of a mobile device from damage. Accepting a blow, the glass is often destroyed, cracked, covered with chips. At the same time, the quality of protection drops significantly, the display overview becomes worse, the gadget loses a presentable appearance. Before installing a new protective glass, you must first peel off the old one. In the article, we will talk about how to remove the protective glass from the phone.

to contents ↑

What precautions should be followed?

Before changing the protective glass from an iPhone, you need to take into account that the surface of the touch screen of the gadget is almost perfectly smooth. Therefore, the protective glass is attached to it quite thoroughly. Most often it is supported by electrical forces, sometimes by adhesive. The surfaces touch so tightly that removing the glass by prying it with the tip of the nail is simply unrealistic. If you use a knife blade, then there is a high probability of damage to the screen and the case of the smartphone.

Silicone suction cup is also ineffective. If the protective surface is badly damaged, then there is no vacuum under it, and the suction cup simply disappears. With good adhesion of glass to the suction cup, problems are also more than enough. The sensor is attached to the case with fragile duct tape, and if you do not calculate your own forces, you can damage the cables and completely disrupt the screen module. That is why deliberate careful actions strictly in accordance with the algorithm are mandatory.

Important! If you suddenly decided to replace glass with a more budgetary film and it didn’t work out well for you to fix it the first time, you don’t have to buy a new one. To solve this problem, our publication will help you "How to remove bubbles from the film?".

to contents ↑

How to remove the protective glass from a smartphone or iPhone?

To get started, prepare and collect the necessary arsenal of funds. To remove the glass yourself at home you will need:

  1. 2 plastic cards, pick and scapula.
  2. The suction cup is silicone.
  3. Napkin made of lint-free material.
  4. Wiper containing alcohol (it can be replaced with vodka, cologne or medical alcohol).
  5. Medical gloves.

The algorithm of actions to remove the protective glass from the iPhone is extremely simple, but at the same time effective:

  • Wash your hands thoroughly with soap, dry them, or wear gloves. It is important that there are no smudges or smudges on the screen.
  • Find a broken (or least damaged) corner on the broken glass. Press a suction cup to it.
  • Pry the corner with the suction cup with a spatula or mediator so that the edge slightly peels off. At the same time, help yourself with a suction cup by carefully pulling it onto yourself. Do not overdo it, otherwise - you can disrupt the screen.
  • As the screen peels off, deepen the spatula or pick.

Important! If the screen is large, you can use 2 tools at the same time, moving them in different directions.

  • Continue to gently pull the suction cup toward you until the glass is completely off.

As you can see, the replacement is fast, there is nothing particularly complicated. Work requires only patience, caution and scrupulousness.

to contents ↑

How to glue the glass?

Is it possible to stick bulletproof glass correctly and with high quality? How to remove the protective glass from the phone at home - figured out. Now about how to fix the new protective surface on the display. In order for the new part to be glued with high quality, the procedure must be carried out in an impeccably clean room, free of dust.

Important! Before sticking, moisten a lint-free cloth in alcohol-containing solution and wipe the screen. This will allow dedusting, degreasing the display and improve adhesion of the two surfaces.

The gluing algorithm is as follows:

  • Take the new glass by the edges. Hands should be clean, dry, or with medical gloves.
  • Remove the protective film from the surface of the glass by pulling on the tab. At the same time, keep the glass closer to the screen of the gadget to prevent dust from getting on the connected surfaces.
  • Place the glass surface a few millimeters from the display and align it carefully.

Important! Make sure that the openings of the camera, speaker, keys and other components match.

  • Connect the glass to the screen. You can get rid of the resulting bubbles by forcing them to the edges with a dry, clean cloth.

Important! Glass provides only screen protection. If your smartphone model does not have a very durable case, pick up the appropriate case on it as well. To make it easier for you to understand which one will be better and more convenient, in a separate article we cited Comparative review of silicone and PVC cases.

to contents ↑

Stock footage

The work is completed! Your smartphone again looks like brand new, while you have saved your money and time traveling to the master and paying for his services. And this is always a pleasant bonus when solving any problems with the equipment.

1 star2 Stars3 stars4 stars5 stars (No ratings yet)

Report typo

Text to be sent to our editors:

Adblock detector