To sew a cloak on a dress with your own hands

Usually, when a thing is worn many times, most people put it in the far corner of the closet or throw it away. From the point of view of economy, this is absolutely irrational. We will tell you how to sew a wrap on a dress with your own hands, which will allow you to give a new life to an old product. It's pretty straightforward - just follow the tips from our article.

to contents ↑

How to sew a chiffon wrap on a dress?

A light cape can be worn in the warmer months with clothes that open your shoulders. To create it you will need:

• Light matter, such as chiffon or silk.
• Lace.
• Satin ribbon.
• Brooch.
• Scissors.
• Rubber

Your actions:

1. From the fabric, cut a rectangle.
2. Put it on an elastic band from one of the sides. This will be the neck.
3. Then wrap the place where the neck is located with satin ribbon and attach a brooch, which will also be a clasp.
4. Sew lace tape to the remaining edges of the product.

That’s all - your wrap is ready! It will take you no more than an hour to create it.

to contents ↑

Cape from a square with a photo

How to sew elegant wraps from guipure or organza for a girl with your own hands? Such a wrap on a dress with your own hands is quite universal, because it is suitable for people of different ages. In addition, it can be worn anywhere and anytime, depending on what material you choose.

You will need:

• Material.
• Sewing machine.
• Scissors.
• Pins
• Threads.

Your actions:

1. Cut a square out of the material.
2. Cut a circle in the middle. The easiest way to do this is to fold the fabric in half.
3. Scissors walk from the circle to one side.
4. Sew all edges with a sewing machine.

Important! You will also need a clasp. It can be purchased at the store, or you can just make a loop with your own hands.

to contents ↑

Cape for a special occasion

In the case of a cloak for a festive event, you can give free rein to your imagination by choosing jewelry. You can use everything from transparent materials to feathers, but keep a balance.

Fabric selection

First you need to decide on the main and finishing material. As an option - you can consider such materials as velvet, chiffon, satin and even fur.

Important! You will also need a lining, which should be in color to the base material.

Measurements

This is very important if you want to sew a wrap that fits your size perfectly.

The parameters that you need to measure: neck circumference, distance from the shoulder to that desired mark.

Important! A short cape, such as a drape, is up to the elbow. Longer variants resembling the mantle most often reach calves.

Product radius

The next step is to measure the radius of the product. It is calculated in this way - you need to divide by 2 the number equal to the circumference of your neck, multiply it by 3.14 and round it.

Blueprints

Now we begin to prepare the fabric for sewing. To do this, fold the matter into four layers and turn one of the corners to the opposite.

Then use a chalk or a simple pencil to draw the bottom line and neckline.

Cutting

At this stage, we cut the mantle. Do not forget to make allowances that are needed for seams.

Sewing

Next, you need to sweep the product, and then stitch it on a sewing machine. After sewing is finished, you can immediately put on the product, or you can decorate it to your taste.

to contents ↑

"Red Riding Hood"

In such a wrap you will resemble a little red riding hood. In it, you definitely will not go unnoticed. Wearing it is best with simple, basic things.

You will need:

• Fleece of red color.
• Clasp.
• Rivets.
• Super glue.
• Scissors.

Master Class:

1. Fold matter in three layers.
2. Cut one corner in a semicircle.
3. Then you need to turn out the material and cut the neck.
4. From the middle of the neck you need to cut a strip.
5. Sew rivets around the edges of the product.
6. And the last step is to fasten the clasp.

to contents ↑

Cape with a hood

In order to sew a wrap on a dress with your own hands in the form of a model with a hood, you need to prepare the following:

• The main material is in our case fleece.
• Lining material.
• Patterns.
• Rubber.
• Scissors.

Important! It is best if the width of the fabric is at least 1.5 m. For the hood, you need to take another stock of 45-50 s, and if you want to add a collar, then another 17 cm.

Master Class:

1. Cut the fragments (hood and cape) of your future cape according to the patterns.
2. Fold the parts with the front side and sew along the rounded part.
3. The cape needs to be stitched at equal edges and a cut is made on the front.
4. Sew the details of the hood and lining in the same way.
5. Sew the lining to the hood.
6. All parts of the cloak need to be stitched together and the edges should be sewn with a zigzag stitch.

That's all. Your wrap is ready! It remains only to make a loop or buy a ready-made fastener.

to contents ↑

Stock footage

A beautiful cloak for an evening dress, office or even a sundress is able to transform the image. As an option - of course you can buy one in the store, but why, if the cloak is very simple to make manually. You will need a minimum of funds and skills. Choose one of our ways to sew a wrap on a dress made of chiffon or some other material, and go - you are guaranteed to get an amazing decorative detail for any outfit!