Carpet Vanish for Manual Cleaning

Cleanliness of the house is the key to good mood and health. But often cleaning turns into torture, especially when it comes to cleaning carpets. Dry-cleaning carpets is expensive, and self-cleaning is very labor-intensive. But today there is a remedy that makes life easier for millions of housewives. Let's talk about “Vanish” for carpets for manual cleaning and other product options of this brand.

to contents ↑

Types of Detergent

Under the Vanish brand, today they produce several products of different shapes that allow you to clean your carpet from various stains. It is convenient that the products of this brand are available in almost any store.

Facilities:

1. Shampoo for carpets. Their manufacturer produces two versions: “Vanish” for carpets for manual cleaning and with an antibacterial additive for cleaning with a washing vacuum cleaner.
2. Spray stain remover for carpets.
3. Powdered “Vanish” for dry carpet cleaning.
4. Foam for cleaning stubborn stains from carpets.

Each of the brand's products has its own characteristics and is suitable for various cleaning methods. But any of them can be applied a number of recommendations.

Recommendations:

1. The first thing to do when choosing any of the tools is to study the instructions for use.
2. Do not use cleaners on coatings that may fade.

Important! This also applies to handicrafts. Before use, it is better to conduct a small test, and check the resistance of the paint in an inconspicuous area.

3. Before using “Vanisha” the carpet should be vacuumed - so you will achieve its maximum efficiency. In our review you will find out how to choose a powerful, lightweight and compact vacuum cleaner for cleaning.
4. You can not use such a cleaner when working with washing vacuums. The exception is only specially designed shampoo for washing equipment.
5. After cleaning, it is recommended to ventilate the room in which the work was carried out.

We will figure out how to work with each of the line tools.

to contents ↑

Operating principle

So, in the brand line there are four main products with various functions. How to choose the right one and how to use it? Consider the nuances.

Powder

This product is designed to clean large carpet surfaces, and even removes old stubborn dirt. It is convenient to use, and in addition to cleanliness, it gives your carpet a fresh look.

The composition of the product allows all contaminants to go up, making them very easy to remove.

Important! You do not need to add water to this product - it is used in the form in which it is sold.

We will figure out how to use the powder. To do this, a number of actions should be taken:

1. The first stage is preparation. The surface to be treated with the product is vacuum cleaned without adding water. The cleaning agent is immediately prepared according to the instructions on the packaging.
2. After preparation, the product is applied with a soft brush to the carpet and wait about half an hour until it dries.

Important! When applying, make sure that the powder is distributed as evenly as possible.

3. After the required time, the product is collected using a vacuum cleaner. If the power of the device is insufficient, the procedure is repeated several times until all the powder remains are removed.

Important! If everything is done correctly, cleaning with the help of the Vanish powder will be quite easy and very effective.It should be remembered that it is necessary to test the substance, ventilate the room after the procedure, and also use disposable paper bags for a vacuum cleaner, because it is much easier to throw out the collected product along with the bag than to shake it out of the fabric bag.

Spray

This product is designed to remove stains. The manufacturer advises using it as soon as the stain appears. But even if the pollution is already ingrained, this is not a reason to refuse the spray, because it can cope even with very difficult cases. It is very simple and convenient to use, and with it any of your cleaning will become much easier.

How to clean?

1. Pre-vacuum the carpet.
2. We spray the spray onto all contaminants, without strong pressure, wipe them with a soft brush for better penetration of the product into the stain.
3. After - you need to wait 3-5 minutes, clean the treated area with a soft cloth.

Important! An important condition remains the test for the durability of the paint before using the product.

Next, let's talk about shampoo for carpets of this brand.

Shampoo

The manufacturer produces two types of such cleaning products:

• for manual cleaning;
• for use with washing devices.

In these options, “Vanish” produces antibacterial shampoos, the purpose of which is not only to clean the carpet from pollution, but also to disinfect it. Consider first the first option.

Manual cleaning

As for other species, a certain cleaning procedure is provided for these products:

1. Preparation: vacuum the carpet in the usual dry way.
2. We prepare an aqueous solution of a cleaning agent in a ratio of 1: 9, and for a better result, mix well and whip the agent to form a thick foam.

Important! The water temperature should be around 40 degrees.

3. The third step is to apply the product with a sponge to the soiled carpet. For high-quality cleaning, only the foam from the solution is needed, the carpet should not get wet.
4. When the foam is completely absorbed into the carpet and dries, it is cleaned with an ordinary vacuum cleaner.

Important! General tips for using any Vanish products are relevant in this case as well.

Vacuum Cleaners

For this type of equipment, the manufacturer has developed special tools, the use of which also implies a certain sequence:

Important! You don’t have a washing vacuum cleaner yet, but have you ever thought about buying it? Read on our portal detailed selection tips and descriptions of the best models in the article "The best washing vacuum cleaner".

1. Before cleaning, it is necessary to vacuum the carpet, but do not wet it.
2. For one liter of water with a temperature of about 40-45 degrees, we dilute 1.5 caps of the product.
3. Pour the solution into the compartment of the washing equipment and clean the carpet in the usual way.
4. Next, the compartment with the product is removed, washed, wait for the carpet to dry completely and washed with a vacuum cleaner again, but with ordinary water.

Important! In this case, the ban on the use of washing equipment, of course, loses its relevance, but the remaining requirements of the manufacturer remain valid.

Foam

The manufacturer has developed this tool for the most persistent stains that often appear in the corridors or in the kitchen. It cleans the surface well and renews its appearance.

How to clean?

1. Preparation - cleaning the carpet with a vacuum cleaner.
2. Shake the container thoroughly, and evenly apply the product on the carpet from a distance of at least 0.5 m.
3. If necessary, we help distribute the foam with a sponge.
4. We wait until the product dries (up to three hours), we clean the carpet with a vacuum cleaner.

After using any of the means, do not forget to ventilate the room.

Important! Another tool is very popular among consumers, which we described in detail in our separate publication Amway Carpet Cleaner.

to contents ↑

Stock footage

Despite the various forms of “Vanish” for carpets, the composition of the products is almost identical.The combination of active substances allows you to remove even very persistent contaminants, and proper preparation and use in accordance with the instructions will help to achieve the highest quality result.