Electrified plaid - what to do?

Everyone had to deal with static electricity in everyday life, in public places. It is present in the apartment, transport, at work, during the procedure of combing hair, in contact with clothing or any objects. Such friction electricity is unsafe. In this article we will look at ways to get rid of static electricity, and if a plaid electrolyzes, hair electrolyzes - what should I do?

to contents ↑

What is static electricity?

The electrification of materials causes static electricity. Static electricity is the formation of free electrically charged particles on any surface or in the bulk of materials that do not conduct electric current.

Important! Static electricity is accompanied by a violation of the intramolecular or intra-atomic equilibrium state, in which the electron is lost or acquired. The rate of formation of free electric charges is affected by speed, friction force and the difference in the electrical properties of materials.

In nature, most often static electricity is observed:

• Near large waterfalls, where in the surrounding air there is an excess of negative ions over positive ones.
• Near the shores of the sea coast, where the presence of a positive charge is observed in the surrounding atmosphere due to the presence of salt water.
• On snowy mountain surfaces where avalanches occur.
• Lightning also serves as a source of static electricity.

Important! In the modern world of human habitation, static electricity is one of the types of environmental pollution. This type of pollution is caused by the use of a huge amount of synthetic materials in the construction industry, the presence of a wide range of artificial fabrics in light industry, the use of non-natural raw materials for the manufacture of furniture and equipment. Therefore, it is not at all surprising that such a familiar object as a plaid is electrified.

to contents ↑

The effect of static electricity

Office equipment, computer equipment and all kinds of household appliances are a source of static electricity. Such a technique creates an electrostatic field both of the cases of these devices themselves and of microscopic dust particles that fall into the coverage area.

There is a sedimentation of charged particles on:

• furniture upholstery;
• display screen;
• carpet flooring;
• linoleum surfaces;
• synthetic clothing;
• the skin of a person and in his respiratory organs.

Until now, researchers have not fully studied the effect of static electricity on the human body. Although many scientists adhere to the generally accepted assumption that the so-called neuroreflex mechanism has a major influence on the human body. In contact with the device, which has an electrostatic charge, a small discharge of the device’s charge occurs through the human body. As a result, a reflex movement appears, which leads to various injuries and falls.

Important! A prolonged stay of a person in an electrostatic field can contribute to functional changes in both the central nervous system and the vascular system of the heart. Due to such functional changes, loss of appetite, sleep disturbance, headache, increased irritability, and increased emotionality occur.

In addition, there may be a risk of phobias, which are expressed in a person’s fear of an electrostatic charge and the presence of pain.

to contents ↑

Static electricity at home

Consider the main causes of the electrostatic field at home:

1. Dry air in the room leads to the formation of an electrostatic charge. This can trigger the electrification of the plaid. To prevent excessive dryness, moisten the room. You can use the simplest methods, such as: regular airing of the room, constant wet cleaning. It is also possible to purchase a special device for humidification. You can simply pour water into the container and put it near the heat source, or just damp towels or wet rags on the battery. There are a lot of options.

Important! Indoor plants are located on the windowsills of each house or apartment. They contribute not only to air purification, but also to a decrease in the electrostatic field. The presence of ficus, dracaena, chlorophytum, echeveria, begonia, lemon and other indoor plants helps regulate indoor humidity.

2. The modern interior of each living room is characterized by the presence of synthetic materials. It is best to use natural materials to purchase furniture, bedspreads, carpets, curtains, and linen. Even better is to show your imagination and use our workshops to make it soft and comfortable.DIY bedspread. So you will definitely be confident in the quality of the product and it will not cause you any problems. If this is not possible, then it is necessary to use antistatic agents for processing interior items or use a damp cloth to wipe surfaces.
3. It is impossible to imagine a modern apartment without convenient household appliances. The presence of electrical equipment, concentrated in one place of the room, causes the appearance of static electricity. Therefore, it is preferable to place electrical appliances evenly throughout the apartment, while it is not recommended to use all household appliances at the same time.

Important! When working with electronics, they use antistatic wristbands. Such special devices are worn on the wrist and attached to the grounded part of the electronic device. If such a bracelet is not available, then when working with electrical equipment, do not touch the open parts of the body to the equipment. You can only lean against the grounded part of the appliance.

to contents ↑

What to do to prevent the plaid from being electrified?

The electrification process is directly related to the dryness of the air in the room. Therefore, there are several effective ways to get rid of static electricity:

• If the blanket is electrified, it can be wiped with antistatic wipes, which eliminate this phenomenon.
• You can use a spray bottle and spray water on the bedspread. When the water drops dry, the plaid will no longer be electrified.
• You can also get rid of statics if you use the spray of an antistatic spray.
• Ordinary hair spray can also help eliminate electrification. You need to lightly spray the hair spray on the bedspread from a distance so as not to leave spots on the plaid.

Important! Hairspray has a formula that allows you to fight the electrification in your hair and can also rid the bedspread of static charge on the fabric.

• You can hang a damp blanket on the battery. All static electricity through the pipes will go to the ground.
• Baby powder can also help in solving this problem. To do this, apply a small amount of dust on the plaid, then shake off the leftovers.

Important! Remember to also find out everything.

Long-term solution against plaid electrification

For a long-term solution to the problem of static electricity, you must:

1. Increase the humidity in the room. As a rule, bedspread electrification appears in winter, when the room is heated, and the air in the apartment is very dry. If you purchase a humidifier and install it in an apartment, then after a while the electrification will disappear.

Important! If this device is not available, then you can hang the plaid in the bathroom after taking a shower. The presence of moist air will save the plaid from electrostatic charge.

2. It is necessary to wash the cover in the washing machine at low speeds. During the drying process, put an antistatic cloth inside while the blanket is still wet.

Important! If for some reason you had to use hand washing, then a little baking soda should be added to the detergent to reduce the electrification of the bedspread. Baking soda promotes the formation of a protective layer and prevents the accumulation of negative or positive charges that lead to electrification of the plaid. The use of soda also eliminates odors.

3. After completing the washing process, stop the washing machine and add white distilled vinegar. If the washing machine has a softener compartment, then vinegar can be poured into the dispenser before the full washing process.

Important! Vinegar helps soften the fabric of the bedspread and prevents it from drying out, and also prevents the plaid material from becoming stiff. This reduces the electrification of the bedspreads. White vinegar is best suited for this process, but if necessary apple cider vinegar can also be used.

4. By performing the washing process of the bedspreads, you can put a small piece of foil in the washing equipment and start a regular wash. The presence of foil will allow the discharge of positive and negative charges formed during the washing procedure.
5. When washing a plaid, use a fabric softener. The use of a liquid fabric softener, as well as the use of softening wipes help prevent the formation of static stress. When the wet bedspread rotates in the dryer, static stress builds up, and the softeners consist of special chemicals that prevent charges from forming.
6. There are also drying balls that can soften the bedspread and prevent the plaid from becoming stiff. One or two balls must be placed in the dryer before the drying process, so that the plaid does not become electrified.
7. You can use a damp towel, which must be put in the dryer in the last 10 minutes of drying the bedspreads. In this case, the drying should operate at the lowest temperature. Since electric charges accumulate in very dry air, the addition of a damp towel at the end of the cycle prevents excessive drying of the air in the drying chamber, and the blanket is not electrified.
8. After the plaid has been pulled out of the dryer, it must be shaken to prevent static stress.

Important! This method only works if the cover was immediately removed from the dryer.

9. To eliminate the electrification of the plaid, you need to get rid of the statics of the body. To do this, it’s enough to be barefoot, and the body will be freed from static.

Advice

It is necessary to adhere to some recommendations that contribute to the elimination of static electricity:

• If the bedspread is electrified after washing, there may be an overdrying of the blanket in the dryer.In this case, it is necessary to carry out the procedure for drying the plaid either at low speeds, or less time.
• The bedspread must be dried separately from other things, while the room should be well ventilated.
• It is advisable to dry the plaid on the street, since air drying helps to prevent excessive drying of the bedspreads, respectively - the formation of an electric charge.
• The process of washing the bedspreads in hard water contributes to the formation of a static charge in the rug, therefore, to prevent electrification, it is imperative to use an air conditioner for water.

Important! Take note of a few more bedspreads of design ideas, their application in the interior.

to contents ↑

Which blanket to choose so that electrification does not occur?

Nowadays, bedspreads are used not only for practical use, but also as a decorative element in the room. Therefore, it is necessary to carefully choose a blanket so that it gives pleasure, and not continuous problems. The most important thing that you need to pay attention to is the material of manufacture. The quality of the plaid depends on the fabric.

Important! All bedspreads are divided into two types:

• plaids in which natural fibers predominate;
• blankets that contain a large number of synthetic fibers.

Materials

Consider the basic materials from which plaids are made:

• Bedspreads made of fleece, viscose, faux fur and acrylic are synthetic products that contribute to the electrification process of the plaid.
• Acrylic bedspread - very easy to clean. Such a plaid is gentle to the touch and is mainly characterized by a bright color. But this is a synthetic product, the material of which can hardly pass air. Synthetic fibers have a not very pleasant property - the effect of electrification. Therefore, sometimes a situation arises in which the plaid is shocking. In addition, much more dust settles on the acrylic bedspread than on natural rugs.

Important! To maintain the quality of the acrylic bedspreads, it must be washed at a temperature not exceeding 30 degrees.

• Fleece blankets are very soft and thin and can cause an electrifying effect. Fleece and polyester relate to synthetic materials that are similar in appearance to natural wool.
• Faux fur bedspreads are currently very popular. Such plaids have an attractive texture that gives the decor a certain element of luxury. Plaids made of high-quality faux fur perfectly let air through, pleasant to touch, do not wear out so quickly and do not fade in the sun. At a price they are more expensive than fleece covers, but cheaper than cotton models. A fur blanket will sometimes be shocked and subject to the effect of electrification. In addition, it helps to attract and retain dust.

Important! The continuous use of synthetic fabrics in daily life is not recommended. Experts recommend choosing bedspreads only from natural fabrics that have the best quality indicators.

• Woolen blanket is one of the best natural materials, which is characterized by the best heat retention and excellent air throughput. Such a blanket is not electrified; underneath it is very warm and comfortable to sleep. In the heat, such a blanket gives a comfortable freshness, and in damp weather it warms.
• Cotton bedspread is the most affordable in quality and price factor. Cotton blankets warm well, tolerate the washing process and are environmentally friendly.

Important! Choosing such a cover, you need to pay attention to the quality of the seams, since high-quality tailoring guarantees a long life of the entire product.

Advantages and disadvantages of synthetic rugs

The main advantages of synthetic fabric bedspreads include:

• synthetic products do not require special care;
• perfectly erased at any temperature conditions;
• have light weight;
• diverse in design;
• differ in low price.

The main disadvantages of synthetic materials from which bedspreads are sewn:

• They attract dust very well.
• These rugs are subject to electrification.
• They pass air poorly and cannot provide such air circulation as natural ones.
• Since the composition of the bedspread includes synthetic fibers that are able to accumulate electrostatic charges, after a while the rugs attract smell and dust.
• In order to prevent the effect of electrification, it is necessary to use special means during the washing process.

Important! Currently, there is practically no material that 100 percent contains a certain type of fiber. Mostly natural fibers are mixed with synthetic. Such mixed fibers contribute to the durability of the plaid. But if you do not want to constantly think that the plaid is electrifying - what to do, choose a product in which the percentage of synthetics is minimized.

Care Rules

It is very easy to care for the plaid so that it is less electrified. To do this, you must:

1. Shake out any kind of dust cover periodically.
2. If the plaid is not made of wool, then it calmly transfers machine wash at a temperature of 30 degrees.
3. The blanket should not be subjected to a spin cycle.
4. The bedspread needs to be laid out on a table and in this form to carry out the drying process.
5. The blanket should “breathe”, so the plastic packaging is unsuitable for storing the bedspreads. If you are not temporarily using a blanket, it is best to save the blanket in a cardboard box or simply folded on a cabinet shelf.

to contents ↑

Why does a person electric shock and become electrified?

For the human body, the phenomenon of electrification is a completely harmless factor, since the charges that are produced are very scanty and are characterized by a slight tingling effect. There are plenty of opportunities to electrify in the human body:

• The sole of the shoe rubs against the floor and an electrostatic charge occurs.
• Clothing on the human body made of artificial materials is also electrified, and after it is the human body, the small hairs of which perfectly charge. As a result, unpleasant adhesion of synthetic clothing to the body occurs, which leads to the formation of piercing sparks of current discharges.

Important! If a person whose body is electrified is touched by a metal object, such as a refrigerator, then the accumulated charge is instantly discharged and the person feels a light electric shock.

to contents ↑

Stock footage

Now you know about all the factors that may be the reason that the plaid is electrified. Pay attention to sorting and a more competent choice of your clothes, taking care of your own body, buying interior items, adjust your life competently, and then you will remember much less about statics in the future.