How to fix paint on fabric at home?

Often in our lives there are so few bright colors. So why not make up for the shortage with colored clothes? And worry about the fact that over time the paint can be washed, painted or even faded, it’s not worth it at all. In this article, we will share with you tips on how to fix acrylic paints on fabrics at home and thereby extend the life of bright things, how to save a picture when painting things? So read some easy but important tips to make your task easier.

to contents ↑

How to fix paint on fabric at home?

There are several ways to fix paint at home.

To do this, you will need:

  • water;
  • soda;
  • vinegar;
  • washing powder;
  • washing machine;
  • ammonia.

Steaming

The most common method of fixing paint to fabrics is the steaming method. Following this instruction, you can achieve the desired result:

  1. Lay the item on a thin cotton cloth and gently roll it into a small roll so that it is not too tight.
  2. Then fold it in half, fasten the edges with tape and tie with a rope.
  3. Pour some water (not more than 2 cm) at the bottom of the pressure cooker and put a bundle on a specially installed tripod.
  4. Take the foil and cover the bundle with a pre-made cap (foil). Thus, a home-made dome can protect the bundle from condensation, which will collect on the lid of the pressure cooker.
  5. Next, close the double boiler and bring to a boil, gradually reducing the heat.
  6. Steam for 20 minutes in low heat.
  7. Then turn off the pressure cooker and let it cool.
  8. Take out the package, carefully unfold it and dip the item in soapy water for 5-10 minutes.
  9. Next, wash in a washing machine on a delicate mode with the addition of powder to remove all excess solution and paint.

Important! If the reason for the molting thing was your experiment with a shade of fabric and you plan to continue updating your things in this way, try first to figure out what you did wrong.

Read detailed instructions on how to dye a fabric at home.
uksus_nezamenimiy1

Fixing paint with vinegar

The easiest way to fix the paint is to fix the color on the fabric with vinegar, because this procedure will take a few minutes, and the result will not be long in coming.

So we need:

  • large pelvis;
  • 10 liters of cold water;
  • 1 cup vinegar.

Important! In the absence of vinegar, you can use 0.5 cups of salt + 0.5 cups of baking soda.

Perform this procedure by following these instructions:

  1. Mix 10 liters of water with half a glass of vinegar.
  2. Stir the solution thoroughly and lower the thing on which you need to fix the paint for 5-15 minutes.
  3. Remove the item and rinse it in cold water several times to remove a pungent vinegar odor.
  4. Hang the item to dry, and then iron it from the inside, while disabling the steam function.

Fixing paint on wool with ammonia

On woolen fabric, as a rule, paint is fixed differently. Therefore, both the method and the method of fixing the color on the woolen fabric is slightly different.

Important! Please note that the result of dyeing things and their further shedding directly depends on how high quality materials you used when updating clothes from different fabrics.Read a separate article, the information from which will probably be useful to you in the future, about best fabric paints.

To do this, you need to do the following:

  1. Wash the desired item in a weak solution of water with rinse aid or detergent.
  2. Squeeze the product slightly.
  3. Prepare a solution (10 liters of water + 1 tbsp. Ammonia) and rinse the thing.
  4. Then wash clothes in a solution of water and 2 tbsp. l vinegar. Gently squeeze and let the fabric dry completely.
  5. Iron the item from the inside by disabling the steam option at this point.

Important! In no case should the water temperature during washing of wool fabrics exceed 35 degrees, as this can lead to a decrease in fabric size.

How to keep the bright color of the cotton fabric?

The bright color of the cotton fabric will help to keep washing things in a special solution immediately after purchase. A solution of salt and soda is perfect for this:

  1. Pour 10 liters of water into a large container, as well as half a glass of soda and salt.
  2. Soak the product for a while in solution.
  3. After that, thoroughly rinse the well-crafted thing in clean water (until the material stops coloring the water).
    cf20-oxford-cotton-font-b-fabric-b-font-leaf-font-b-maple-b-font-leisure-luxury

How to save a self-made drawing?

Consider another option, how to fix the paint on the fabric at home, if you decide to transform it with your own pattern:

  1. First you need to carefully read the instructions for the paint with which you apply the drawing.
  2. Then iron the pattern, having previously turned off the steam function and setting the mode that is suitable for cotton.
  3. It is better to iron through thin gauze or on the wrong side so as not to damage the pattern.

Important! In the future, wash in water no higher than 40 degrees and only on a delicate wash.

to contents ↑

How to check the fabric for color strength?

Not all bright things are prone to molting. Therefore, in order to determine whether there is a need to carry out procedures for fixing color on the fabric, it is enough to conduct a few simple experiments beforehand.

So you have to do the following:

  1. Dampen a small piece of cloth on the thing you need to check, and then attach a sheet of paper to it and pass the prototype through it. If after this color stains form on paper - be sure that this thing is prone to fading and shedding.
  2. Take a small sample of fabric (an extra flap is usually sold on the tag of the item or cut off at the seam) and dip it in liquid ammonia for about 7-10 minutes. Then rinse and dry the flap. If the color of the prototype has become more dull than the thing itself, know that the material is molting and you need to fix the paint on the fabric at home.
  3. Dilute a small amount of washing powder in warm water and dip the item there for 5-10 minutes. Then take out and, without rinsing, wrap the thing in a small flap of white cloth, slightly pressing. If after that the color switched to white material - the product tends to fade.

Important! If you didn’t do it on time and the molting thing shared its color with other clothes, then you better use the ideas to give second life of a favorite thing after unsuccessful washing.

After you have learned to identify things that are prone to fading and loss of color, it would be appropriate to tell you how to properly wash fabrics that fade, and what are the rules for this.

to contents ↑

Tips for washing molted items

In addition to the washing rules indicated on the tags of things, you should not forget about some important tips that will help you keep a presentable appearance of things for a long time.

Here are some of them:

  • Before washing, do not forget to sort the laundry by color (black separately, color separately, etc.).
  • It is better to choose powders and rinses that fix colors, preference should be given to gels.
  • Do not use stain removers and bleaches, as this can lead to loss of color.
  • When washing, the water temperature should not exceed 30-40 degrees.
  • To fix the color, you can use the above methods of fixing the paint.
    to contents ↑

    Stock footage

We hope that our tips and tricks will help you, and in the future you will not have any problems with fixing the color on the fabric at home. And also, we assure you that by observing these simple rules you will be able to maintain the old attractive look of your favorite bright clothes, to avoid shedding and burning out.

 

1 star2 Stars3 stars4 stars5 stars (No ratings yet)
Loading...
Adblock detector

Wardrobe

Electronics

Wash