How to clean the steam generator from scale at home?

Any self-respecting housewife tries to keep up with progress. Now you can not find a single family that would do ironing without using a steam iron. It is no secret that any modern model has long had functions as if it were a small computer, but in difficult situations one cannot rely on it. One of these situations is cleaning the steam generator. You say that your iron has a self-cleaning function? This is a great feature, but what to do when it fails? How to overcome heavy scale? This is where the matter goes into reliable and proven hands of a person. We will figure out what you need to do and how to clean the steam generator from scale at home.

to contents ↑

What prevents ironing?

Violation of the rules for the operation of equipment can lead to the following problems:

  • Scale in the tank of the household appliance.
  • Nagar on its sole.

Such defects will very quickly disable your steam generator, which will force you to look for a replacement. And if the iron has a complex structure, then the breakdown of the steam generator can lead to the replacement of the whole iron.

to contents ↑

Steam generator cleaning

This article will help you figure out how to clean the steam generator from scale. But first you need to get acquainted with the exceptions. And where now without them?

Important! A faithful companion in cleaning the steam generator is a steam cleaner. For detailed information on which surfaces can be cleaned with this useful household appliance, cleaning tips can be found in our separate review. “What can be cleaned with a steam cleaner”?.

What models cannot be cleaned?

Steam generators can be classified into two types:

  • Self-flowing. Comments on the work are superfluous.
  • Pump models. Such models work under pressure. Steam is supplied in a more efficient way. Such electrical appliances have steam buttons that are located on the iron body itself. It is these models that cannot be cleaned at home.

Important! To clean the latter, contact a service center. Do not try to remove the dirt yourself!

But gravity models are not so capricious, although their work is less efficient. They can easily be kept clean on their own and not be afraid of damage. Below we will talk about improvised care products.

Lemon acid

To cope with the scum inside the tank, dilute 30 g of citric acid in a liter of warm water and mix thoroughly. Next, do the following:

  1. Fill the reservoir with the resulting liquid.
  2. Let it stand on the iron for about twenty minutes.
  3. Turn on the device and set the maximum power.
  4. Start ironing (you can use old and unnecessary things). Evaporate all liquid from the tank.
  5. Fill a container with plain water. Turn on the iron for 10 minutes, then unplug it and drain all the water.
  6. Rinse the container with water two or three times.

Important! For lack of such at hand, you can use vinegar, diluting it with water in a ratio of 1: 1. Such a tool will also help you quickly clean the steam generator from scale at home.

Decalcifier

This tool has been used for years to remove scale from household appliances. It is sold in the form of gels, tablets and powders. On the package there are proportions for diluting the solution. The cleaning process is no different from the previous method.Some use plain mineral water for this purpose.

Advice

Cleaning the steam generator will save you from various defects on the walls of the tank, but care must be taken with special care.

Important! It is worth remembering that in no case can you use hard brushes and unfiltered water for such a procedure, so you can damage the integrity of the container and deposits will begin to appear only more intensively.

Careful attitude to the steam generator will save you from the need to purchase an expensive replacement.

Important! Every housewife was faced with the problem of stains on upholstered furniture, and yet I really want the house to be spotlessly clean. Find out in our article,how to clean a sofa with a steam cleaner.

to contents ↑

How to prevent yourself from scale?

There is no doubt that no one wants to overpay once again for something, if this can be avoided. It is not necessary to clean the steam generator daily. You can simply follow simple operating tips:

  • Do not use untreated water, because salts and minerals in it also lead to the formation of scale, use only filtered water or get distilled. The formation of scale, by this method, can be postponed for six months. These precautions will extend the life of your “home mate”.
  • If you have not purchased a new iron, but know in advance that there will be a lot of work for it, get a model with a steam generator like a boiler. Such models warm up very quickly and produce a good steam flow.

to contents ↑

Get rid of soot

A special chemical pencil will save you from soot, which you need to put on a heated surface, wait a while and wipe it thoroughly.

Important! The substance of the pencil can close the steam holes or get into the iron capacity, which will lead to damage to the household appliance. Use cleaning agents with caution!

The aforementioned citric acid also does a good job with small impurities. For cleaning, you need to make a solution and apply it to the surface by analogy with a pencil. Citric acid is variable in this procedure. It can be replaced with mineral water, toothpaste, laundry soap and even vinegar.

Important! Do not use harsh materials on the surface. So you can leave defects in the form of abrasions and scratches on the substrate.

And we will not, of course, forget that this is an electrical appliance, and the rules of elementary safety engineering are applicable and mandatory for it.

to contents ↑

Stock footage

Now you are fully armed to use a good steam generator for a long time and correctly and quickly put your things in order!

1 star2 stars3 stars4 stars5 stars (No ratings yet)
Loading...

Report typo

Text to be sent to our editors:

Adblock detector

Wardrobe

Electronics

Wash