How to eliminate the vibration of the washing machine during the spin cycle?

Your washing machine worked without problems, when suddenly it started to jump, bounce and make completely non-musical sounds? It is possible that she got up wrong. However, these “symptoms” may also indicate a serious problem that needs to be addressed immediately. We will understand what causes these phenomena are caused and how to eliminate the vibration of the washing machine during the spin cycle.

to contents ↑

Why did the car start to jump?

There are many reasons for jumping and increased noise. Here are the most common ones:

• Small objects falling between the tank and the drum. For example, often we put clothes with paper clips, pins or coins in the unit. Using these items will help prevent these items from getting in.laundry bag.
• When transporting the washer, the transport bolts were not unscrewed.
• Incorrect distribution of laundry in the drum of the appliance. This problem applies to older models of washers. New modifications are equipped with a function of automatic distribution of linen in the drum.
• Damage to the electric motor.
• Incorrect installation of the machine on the supports.
• Bearing failure.
• Malfunction or severe wear on shock absorbers and springs.
• Counterweight deformation or loose attachment.

Important! From another article on our site of useful tips, you can also get useful information abouthow to install a washing machine so that it does not jump.

to contents ↑

How to find a malfunction?

There are a lot of problems, so it’s quite difficult to find out exactly what caused the vibration and extraneous sounds. Therefore, it is most rational to exclude the simplest options.

So, we begin to analyze the problems so that eliminating the vibration of the washing machine is effective:

• See if the laundry in the car is curled up in a knot. This is a fairly common occurrence (for example, small objects get inside the duvet cover).
• Check if you have loaded too much laundry into the machine. For each model, the values ​​of the ultimate mass will be different. View recommendations and calculation tablesdry laundry load weight.

Important! Items intended for washing should occupy no more than ⅔ of the drum - this affects not only the leaps of equipment, but also the quality of the wash itself. In this regard, modifications to washing machines equipped with a display are very convenient, which, under excessive load, produce UE or UB errors.

to contents ↑

How to install a washer?

Vibration can often be caused by improper installation. This happens when the owner tries to mount the device themselves. The most common mistake is when the owner completely forgets about the transport bolts. Sometimes the bolts are removed, but the unit is mounted on an uneven or slippery surface. The machine vibrates during the washing process and makes a loud noise.

How to eliminate the vibration of the washing machine in this case?

1. See if the shipping brackets are removed. They are necessary when transporting the machine to fix the drum. If you forget about them, then the rotation of the drum will occur, but with much greater wear, and the device will vibrate and bounce during operation.
2. Remember to ensure that the installation of the machine is done exactly in level.To do this, you can adjust the height of the legs. During the spinning process, the device enters into resonance and not only vibrates, but literally jumps, moves around the room. For this reason, it is undesirable to leave the washing machine unattended.
3. After the installation is completed, check whether the machine is stable. Any precarious position leads to jumps and extraneous sounds.

Important! Even if you entrusted the installation of equipment to professionals, it is advisable to check the listed nuances yourself. This will save you time: both your own and that of others. Test the operation of the machine after it is installed.

Important! Also use special vibration damping devices. We collected detailed information about them in separate posts:

• Anti-vibration stands for the washing machine.
• Mat for washing machine.

to contents ↑

Shock Absorber Failure

Carefully inspect shock absorbers designed to soften drum movement and dampen vibrations. With strong vibrations and jumps, shock absorbers may need to be replaced. The situation is complicated if the springs are out of order. It is necessary to replace both springs and shock absorbers.

Important! As a rule, wear does not occur in the same way, but both shock absorbers must be replaced, for a balanced load distribution.

How to act:

• Look carefully, maybe small things have come under the drum. If they are there, then you have to get them. To do this, you will have to make something like a metal hook to extract rattling gizmos.
• If such an attempt was not successful, then you have to disassemble the unit: remove the drum, heating element, and possibly other components.

Important! If you do not have such experience, it is better not to tempt fate, but to call the master from the service center. You will save both time and money. In any case, calling a specialist will be much cheaper than buying a new device. In addition, the question of how to eliminate the vibration of the washing machine will not bother you for a long time.

to contents ↑

Counterweight Mount

One of the reasons why the machine starts to shake and bounce is the problems with securing the counterweight. To fix it, you will need: a screwdriver, a wrench and pliers.

Important! Assess the status of the counterweight. The counterweight is a weighting agent made of different materials. A counterweight is installed at the top and bottom of the washing machine. They are made of concrete, cast iron or other metals.

A further algorithm of actions will be as follows:

1. Inspect the mounts. If they are loose, then they must be tightened.
2. An attempt to tighten the mount failed? Purchase and install new ones.
3. If deformation of the weighting agent itself has occurred, then it is impossible to do without its replacement.

to contents ↑

Defective bearings

One of the reasons the machine jumps is because of a bearing malfunction. Replacing bearings is not an easy process, so it is advisable to call a specialist who professionally performs this work.

The metal from which the bearings are made eventually deteriorates:

• When the bearings are destroyed, first the machine starts to work noisily, and then the drum is completely jammed. If the bearing has just begun to collapse, “making a diagnosis” is not easy. As a rule, professionals determine the wear of parts, capturing the slightest extraneous sounds.
• And if the bearing is seriously damaged, you can move the drum. If it is too mobile, then this is a signal to call the master.

Important! It is possible to avoid breakdowns of the washing machine by regular proper care of it. In order not to spend a lot of time on this, use the practical tips of experienced housewives, tested more than once in practice. The best of them are presented in a separate article.“Cleaning the washing machine”.

to contents ↑

Stock footage

What if the machine, no matter which company, whether Samsung or lg, shakes violently, and how to reduce the runout? There are many reasons for the vibration of the washing machine. There are as many tips on how to remove the vibration of the washing machine during the spin cycle. But at the same time you need to remember: the more carefully you relate to technology, the more strictly you follow the instruction manual for the equipment, the less unpleasant moments it will deliver to you.