The new kettle smells of plastic - what should I do?

When buying a teapot, we usually don’t smell it, but already at home it turns out that the smell of plastic is not quite pleasant from it. And by the way, then all the water that has been in it also starts to smell. The new kettle smells of plastic - what should I do? Well, do not immediately return it to the store, especially since we bought it because we liked it. Nevertheless, a solution can be found, consider options for removing unpleasant odors.

to contents ↑

Where does the smell come from?

Bad breath can be caused by:

  • Oil remaining after production;
  • Plasticizer, which is added to the housing to increase its life;
  • Low quality dye.

If the oil is practically safe and easy to wash, you will have to tinker with the dye and plasticizer.

to contents ↑

Remove the smell

How to wash an electric kettle and get rid of an unpleasant smell if it stinks with plastic? How to remove odor from electric kettleso that it does not spoil the taste of drinks and smelled of plastic?

  • The use of lemon juice is very effective. Juice of three to four lemons is squeezed inside the container, water is added, and then you need to turn on the device. No need to pour water! After twelve hours, the appliance needs to be boiled again and then rinsed using cold running water. If necessary, the actions are repeated.
  • An alternative method is citric acid, in addition, it does not cost so much. We collect water to the maximum and pour 50 grams of citric acid into it. Next, you need to do the same as in the case of lemons: boil, leave, boil again and rinse.
  • You can use the peel of lemons. Half the capacity must be filled with lemon peel, and then water is added there to a maximum mark. We act in the same way as in the cases with lemon juice and citric acid.
  • Pour half a glass of 9 percent vinegar or two tablespoons of a 70 percent vinegar essence into a teapot. We add water there and turn on the device. The liquid should not boil, as it can overflow over the edge. You need to heat two to three times, and then pour the solution and wash all the internal surfaces of the device.
  • A universal remedy is baking soda. How to remove odor from an electric kettle with this tool? Baking soda, three tablespoons, is poured into the flask, water is added. The solution needs to be boiled, cooled and boiled again. Then the solution is drained, the device is thoroughly washed.

Important! Not every person is able to understand the variety of types and varieties of tea and coffee. We collected all the detailed information in a separate post "The best varieties of coffee and tea".

  • And you can pour water inside and add a few bay leaves to it. The solution is boiled, then washed off. Rinse the appliance thoroughly.
  • An unusual method is to use the Sprite drink. Pour the bottle into the kettle, boil and leave for about ten hours.
  • If the case is very difficult, you can use detergents. The product is poured in, diluted with water and boiled. The appliance is thoroughly washed, clean water is poured and boiled and drained.

Important! When using harmful or aggressive mixtures, be sure to thoroughly rinse the device. If this is not done, serious damage will be caused to health.

Important! In order for tea to be tasty and fragrant, it is not enough to buy the best grade of tea.Much depends on the teapot. Read our tips on choosing and caring for him. “How to choose a teapot?”.

to contents ↑

Remove the musty smell

Why does the smell of plastic remain in the kettle? Do I need to boil the kettle before use? In some cases, you need to know not only how to remove the smell of plastic from the kettle, but also how to cope with an unpleasant musty smell. Such a problem appears due to the fact that the water does not change for a long time. For example, just add a new portion and boil again. And there may be a problem with tap water, which in large quantities contains various impurities, which subsequently settle on the walls and the heating element. In any case, it must be solved, and it can be done in one of the following ways:

  • Citric acid is a universal remedy. It is filled up (50 grams), boiled water and poured.
  • You can use regular sugar. Sugar, two tablespoons, is poured into the bottom of the flask. After twelve hours, the kettle should be washed using warm water and lemon juice.

Important! So that the smell of musty does not appear, it is better to try not to leave excess water in the device. In addition, the cover must be kept open.

to contents ↑

Useful Tips

You studied the question if the smell of plastic in a teapot is how to remove, but if all the methods have failed, it is better to replace the device with a higher quality one. For example, if glass or stainless steel is used for the manufacture, unpleasant odors will not appear. But it should be noted that such household appliances will cost more.

Important! Remember: water boiled in a plastic teapot does not bring harm to health, but you need to fill it with fresh. If water remains in the flask for a long time, harmful compounds can enter it.

The guests are on the doorstep, but is there nothing for tea? Learn how to cook fast delicious cookies in the pan.

to contents ↑

Stock footage

Remove odor from the kettle quite possible. In addition, for this you do not need to use any special special tools. It is quite possible to cope without chemistry.

1 star2 Stars3 stars4 stars5 stars (No ratings yet)
Loading...

Report typo

Text to be sent to our editors:

Adblock detector

Wardrobe

Electronics

Wash