How to clean the seams between tiles in the bathroom

Everyone who follows the hygiene of their home sooner or later wonders how to clean the seams between the tiles in the bathroom and restore the appeal of the entire tile. This is not at all accidental, because it is at the seams that the most bacteria and mold are formed. This entails not only an unaesthetic appearance of the surface, but also harms health. Do not bring the appearance of your bathroom to such a state, it is better to prevent the appearance of serious contaminants.

to contents ↑

How to clean the tiles in the bathroom and the seams between it?

Tile firmly tolerates harsh means of exposure, so the types of cleaners are very diverse:

• alcohol;
• vinegar or citric acid;
• special remedies for mold;
• chlorine-based products;
• window cleaner;
• ammonia;
• melamine sponge;
• steam cleaner.

You will also need such tools:

• Toothbrush;
• soft clean sponges;
• clean rags;
• atomizer;
• napkins;
• latex gloves.

to contents ↑

How to clean tile seams?

Each product requires specific handling for effective cleaning. See a detailed description of the use of each of the above to spend a little time on the entire washing procedure.

Method 1

It very well kills harmful living organisms in tiled seams vinegar or alcohol. For effective use, follow these step-by-step instructions:

1. Take undiluted substance.
2. Dip a toothbrush into it.
3. Sew around the entire perimeter.

Note: Wear gloves and get ready for bad breath. Do not mix about these products, their combination can damage the integrity of the seams.

Method 2

Recently, many special chemical compounds have appeared on the market that cleanse the seams and kill the fungus. They require strict adherence to the instructions:

1. Dilute the concentrate, taking into account the manufacturer's requirements.
2. Apply to the seams with a brush or toothbrush.
3. Leave on for 20 minutes.
4. Rinse off with water.
5. Dry with special wipes.

Method 3

Chlorine-containing detergent concentrates are well suited for the prevention and disinfection of joints. To do this, simply treat the surface and seams with diluted mortar. Rinse off or not - check in the instructions from the manufacturer, as some of them do not need this additional action.

Method 4

Very well, quickly and effectively cleans seams and the entire tile steam cleaner. In this case, proceed as follows:

1. Prepare the device for work, taking into account the wishes of the manufacturer.
2. Process all seams.
3. Dry wipe the entire surface, removing traces of dirt.

to contents ↑

How to wash tiles in the bathroom from lime and rust?

For daily care, liquid or gel-like tile cleaners are suitable. Terms of use:

1. Dilute the substance in water.
2. Using a sponge, treat the entire tiled surface.
3. Use a damp cloth to remove any remaining product.
4. Wipe dry with a napkin or soft cloth.

Sprays for washing windows copes well with dirt and gives shine to the surface. For a quality result, use it this way:

1. Spray the liquid onto the tile.
2. Leave on for 10 minutes.
3. Wipe with a damp sponge.
4. Dry with a cloth.

The easiest and cheapest way to clean the tiles in the bathroom is to use soapy water when cleaning. It is applied as follows:

1. Prepare a soap solution. Do not use liquid and laundry soap for this, but only ordinary toilet soap.
2. Dip a sponge into the solution.
3. Wash the tiled walls from top to bottom.
4. Wipe dry from bottom to top.

Note: This method is effective for daily use. Strong old pollution may not work.

to contents ↑

What else can you clean the tiles in the bathroom?

The use of improvised alternative means is also effective if certain rules and consistency are observed.

Option 1

Very well cleans tiles from plaque table vinegar. Use it like this:

1. Take the spray gun.
2. Pour in it 7% vinegar.
3. Spray over the entire surface of the tile.
4. Leave on for 10 minutes.
5. Wipe the tile with a brush with artificial bristles.
6. Remove vinegar with residue with a damp cloth.

Note: vinegar can be replaced with citric acid solution.

Option 2

Another natural remedy available is alcohol. It has good cleaning and antiseptic properties. Use it like this:

1. Take 4l of water.
2. Add 100 ml of pure alcohol.
3. Apply the solution to the sponge.
4. Peel the tiles.

Option 3

Ammonia also cleans plaque, but it also returns the lost gloss to the tiles. Use this step-by-step instruction:

1. Take 2L of water.
2. Add 1 tbsp. ammonia.
3. Pour the solution into the spray bottle.
4. Spray the solution onto the tiled walls.
5. Leave on for 10 minutes.
6. Wipe with a large, damp sponge.
7. Dry with household wipes.

Note: the product removes repair marks well.

Option 4

There is another way to remove any dirt from the surface of the tile - a melanin sponge. It is applied without additional funds in this way:

1. Dip the sponge in plain clean water.
2. Wipe the entire surface of the tile.
3. Wipe dry.

to contents ↑

Useful Tips

• Do not overwrite tile joints with products that contain a high concentration of acids;
• Treat seams after cleaning with hydrogen peroxide;
• Do not use hard metal brushes when processing tiles with a glossy surface;
• In all cases of processing use rubber gloves;
• Do not use liquid soap to clean the tiles - it leaves streaks;
• Matte tiles are washed with emulsions and covered with wax mastic;
• To preserve the shine of the tiles, do not use plumbing cleaners;
• For daily care of tiles, a solution for cleaning glass and mirrors is suitable. Spray it on the walls and wipe it with a soft cloth. In this case, you will very rarely have to thoroughly clean the tiles.

to contents ↑

Stock footage

Using our tips, returning the tile to a clean, shiny and attractive surface is easy. It is only important to observe safety measures and adhere to the instructions.