How to wash linoleum from dirt?

How to wash linoleum from dirt? - This question is of interest to many modern housewives, because the most sold and sought-after flooring in construction stores at the moment is linoleum. A variety of textures and colors, excellent characteristics of wear resistance and low cost make it possible to pick up goods even to the most fastidious buyer. But despite a number of positive qualities, linoleum coating, like any other, is subject to pollution. Stains may form in the kitchen and other rooms, which are very difficult to get rid of. This greatly affects the appearance of the floor and the quality of the coating as a whole.

to contents ↑

How to clean linoleum? - Maintenance and care tips

In most cases, linoleum for residential premises is made of materials of average quality. Of course, you can use a floor that is more resistant to mechanical damage, but its price will be several times higher, and this is not always advisable.

In order for linoleum to serve for a very long time and look like new, it is necessary to clean it of dirt correctly and in time. To do this, we recommend that you follow a few simple tips for caring for linoleum:

  1. If you just made repairs and made a new linoleum, do not rush to wash it with water. At first, carry out only dry cleaning with a broom or vacuum cleaner.
  2. In the hallway and other rooms, cover the floor with a rug. He will collect all minor pollution (sand, dirt, water from shoes).
  3. Place rubber pads under heavy furniture or purchase special furniture accessories. With their help, the punching of the coating from the load is prevented.
  4. Under the influence of sunlight, the linoleum flooring may lose its color. Therefore, you should take care of the curtains on the windows in order to reduce the direct rays from entering the floor.
  5. Do not drag heavy objects on the floor covered with linoleum. This way you can scratch or tear it. Subsequently, the material will have to be completely replaced.
  6. If you are going to wash linoleum, first sweep away the garbage with a broom.
  7. The ingress of coals from matches, smoldering cigarettes, shoe polish or abrasives leads to the appearance of defects that will permanently spoil the bed linen.
  8. The longer the dirt is on the surface, the more difficult it is to remove it.
  9. Wet clean with a soft cloth using warm water.

Important! Do not use hot water to clean the floor, so as not to damage the protective layer of linoleum.

  1. Ensure that floor care products are completely dissolved in water.
  2. Carefully rinse the products containing soap with water.
  3. Do not use powder cleaners to clean the floor - they will leave scratches on the canvas.
  4. Do not use the flooring in open areas: on the balcony or terrace. Weather conditions negatively affect the material.
  5. Treat the canvas with emulsion or special polymer spraying. This creates a protective layer on linoleum. Such treatment will be especially relevant in places with the highest traffic.
  6. To make linoleum look attractive, wipe it with linseed oil or linseed oil once a month.
to contents ↑

How to wash linoleum from dirt is categorically impossible?

Among all the materials for flooring, linoleum can be called waterproof. Therefore, if you often carry out wet cleaning, do not worry. This will not affect the quality of the flooring. But don’t be too zealous - water can cause dirt to stick to linoleum.

Also, there are some contraindications for the care of linoleum, which, in order to avoid unpleasant situations, should be adhered to. So, what means should be avoided if it is necessary to wash linoleum from dirt:

  • Solutions containing alkali and soda. Similar means lead to a fragility of the canvas.
  • Chemical cleaners, solvents and bleaches have a damaging effect on the structure and affect the color fastness of linoleum.
  • Abrasive components leave microcracks. Subsequently, dirt gets into them, which complicates the cleaning process.
  • Do not use bleach or other substances of a similar composition to disinfect the room.
to contents ↑

How to wash dirty linoleum?

There are many tools for cleaning such a material. Consider first effective washing methods with industrial substances.

Drying oil

To clean linoleum from stubborn dirt, use drying oil. With this tool, you can not only rid the surface of dirt, but also restore color on the canvas, prevent the appearance of cracks. To get a good result, you need to do simple manipulations:

  1. Wipe the wall covering with drying oil.
  2. Use a clean silk cloth to polish the item.
  3. Repeat the procedure once for several months.

chem-myt-linoleum-1

Mastic

You can buy this tool in the construction supermarket. The affordable price of such a product makes it an increasingly popular linoleum care product.

Important! Use the mastic very carefully, strictly observing the proportions indicated in the instructions.

If you plan to use mastic for a new flooring, it is better to get colorless. For old linoleum, use the dark. It will help to hide defects that have already appeared on the floor.

Important! When processing with mastic, a protective film forms on the surface, which has a number of positive properties:

  • Linoleum is less susceptible to wear and loss of color and gloss.
  • Protects against mechanical damage.
  • Creates additional protection against water.

Thus, dust and debris will stick less and make it easier for you wash linoleum from dirt.

Household bleach

A huge number of household bleaches are presented on the shelves of household chemical stores. For example: “Mister Proper” and “Mr.Muscle”. A variety of constituent components in the composition of the funds allows you to choose a detergent, taking into account the features of the flooring. Detailed instructions on the packaging will tell you what concentration the solution should be used for your surface.

Important! Before use, be sure to read the instructions. Observe safety measures at work.

Mode of application:

  1. Dilute the purchased product in the proportions indicated on the package.
  2. Apply the resulting solution to linoleum.
  3. Rinse with clean water if necessary.

Important! After cleaning the floor, be sure to ventilate the room.

to contents ↑

How to wash linoleum from dirt at home?

In addition to popular industrial linoleum care products, you can also use substances that are not directly intended for these purposes. They will definitely be found in the house of each mistress and will not require additional cash expenses from you.

obychnyy-mylnyy-rastvor

 

Soap solution and vodka

Do not know how to wash linoleum in the kitchen from fat? The most severe and persistent dirt on the kitchen floor can be easily removed by preparing a mixture of soap and vodka.This tool is perfect for linoleum of light shades, because on such a coating the traces of fat are very noticeable and leave yellow spots.

Mode of application:

  1. In one liter of water, add 200 g of vodka and one teaspoon of dish detergent.
  2. Use a soft cloth in a circular motion to apply the resulting solution to problem areas.
  3. Rinse off with clean water and wipe the floor dry.

Detergent

How to wash linoleum from fat, if you accidentally spilled a small amount of oil on the floor during cooking? A fatty product should be immediately eliminated, as the floor becomes slippery when oil products get on it, which is unsafe for your health.

To do this, proceed as follows:

  1. To get started, clean the surface with a clean, dry cloth.
  2. In a clean, warm water, add a few drops of detergent.
  3. In a circular motion, remove residual grease from the floor.

Important! The floor should be washed in small areas so that the soap solution does not damage the protective layer on the surface of the linoleum coating.

  1. Wipe the floor with a dry, clean cloth.

Important! If the fat had time to eat into the material, first treat it with turpentine.

Tile cleaner

The tile cleaner will perfectly clean dirty linoleum from greasy stains on a light surface:

  1. Prepare the product according to the instructions on the packaging.
  2. Wipe off any dirt on the surface of the material.
  3. At the end of the cleaning, rinse the treated areas with plenty of water and wipe dry.

Gasoline or kerosene

Use such funds on the surface of linoleum coatings with extreme caution, since these substances do not very favorably affect its structure.

naturalnyiy-linoleum

Option number 1

How to clean linoleum from stains of coffee and food colors so that they do not leave a trace? In this case, gasoline or kerosene will help you. These substances are also indispensable when removing gouache and traces of felt-tip pen. They are applied in this way:

  1. Moisten a cloth with the selected product.
  2. Apply it to the surface of the stain.

Important! Before use, be sure to try the product on an inconspicuous area of ​​the floor.

  1. Wash off the rest of gasoline or kerosene with clean water.

Important! If after processing the surface has lost its luster, use lemon juice to restore it. Rub the tarnished area with a slice of lemon or freshly squeezed juice.

Option number 2

Gasoline will also help to quickly and completely remove drops of wax or shoe polish from the surface of linoleum:

  1. To remove wax, use a spatula to carefully tuck a piece of adhering material.
  2. Wet the rag with gasoline and wipe the stain.
  3. Rinse off with water.

Bleach

Mold stains in the corners and rust marks from pipes that leak, can be easily removed with bleach for clothing:

  1. Mix water with bleach in a proportion of 10: 1, respectively.
  2. Soak a clean rag in the resulting solution and wipe the dirt.

Important! Use a bleaching agent with extreme caution, so as not to spoil the surface of the material completely.

to contents ↑

How to wash linoleum from dirt after repair?

After repairs, building dirt forms on all surfaces and dust settles. In order not to complicate the cleaning process and so that the question of how to wash linoleum does not take you by surprise, the following information will be very useful:

  1. Before starting repairs, cover the floor with a protective film. If not, use newspapers.
  2. If debris nevertheless falls under the protective flooring, wet cleaning should be carried out.

linoleum-floor-cut

  1. Collect all construction debris from the pavement.
  2. Carefully clean off the putty that has already managed to stick to the floor with a spatula.
  3. Wash linoleum with warm water.

Important! Change the water as often as possible to avoid the appearance of stains from whitewashing.

  1. For highly stubborn pollution, you can use white spirit, applying it strictly according to the instructions.
  2. At the end of cleaning, add a small amount of vinegar or potassium permanganate to the water and wipe the floor clean with a clean rag.

How to remove mounting foam from the surface?

Foam during drying not only perfectly fills wall cracks, but also leaves hard-to-remove spots on the floor. To get rid of traces of polyurethane foam on linoleum, you need to do the following:

  1. With a sharp knife, carefully clean the top layer of foam.
  2. Wet a clean rag in water and place on a foam stain.
  3. Leave it on for a while so that the foam gets wet.
  4. If such actions did not give a positive result, in a hardware store it is worth buying a foam cleaner.
  5. Rinse off any remaining product with a damp cloth.
to contents ↑

How to remove traces of brilliant green and iodine from linoleum?

Probably every housewife was faced with the question: how to clean linoleum from very stubborn stains? Iodine and brilliant green are in every home, and drops of green brilliant green on the floor are very common, especially if you have small children who are often scratched. You can still try to help the flooring. Remove contaminants immediately so that the brilliant green does not have time to soak into the flooring. This will help you tools that are easy to find in your home.

First aid for removing greens:

  1. Collect the spilled solution with a porous sponge.
  2. Blot the remainder with a dry cloth.

Important! Never rub the brilliant green or iodine with a rag.

  1. You can try to remove a fresh stain with a soapy solution with the addition of washing powder.
  2. Stubborn stains are removed with alcohol-based products.

Baking soda

You can get rid of spilled iodine using baking soda:

  1. Pour soda onto a clean, damp cloth.
  2. Put the resulting lotion on the stain.
  3. If, as a result, the stain does not completely disappear, repeat the procedure again.

Nail polish remover or ammonia

To remove the brilliant green, you can try applying nail polish remover:

  1. Apply a small amount of liquid to a cotton swab and wipe it with a stain.
  2. As an alternative to a liquid, an ammonia solution can be used.
  3. After using the products, carefully wash the floor with clean water.

obi-kovrovoe-pokrytie-1

Hydrogen peroxide

In each home medicine cabinet, you can find hydrogen peroxide and try to save the coating with this drug:

  1. Apply peroxide to the cotton wool and treat the problem area.
  2. Rinse off peroxide residues with clean water.

Important! Before using peroxide, check its effect on an inconspicuous area of ​​the material.

Camphor alcohol

Very often camphor alcohol is used to eliminate green spots. You can buy it at the pharmacy or search the home arsenal. The application is very simple:

  1. Put on cotton and wipe the green blot.
  2. Rinse off excessively with water.
to contents ↑

How to remove ink from linoleum?

Another liquid that can cause problems when removing it is ink. Cleaning of such spots can not be put off the shelf. If ink is absorbed into the material, it will be much more difficult to remove them.

Remedy:

  1. Take pumice or fine sandpaper and gently rub the contaminated area.

Important! When removing the stain, do not rub it hard on the surface so as not to damage the protective layer.

  1. After cleaning, treat the floor with linseed oil.
  2. Polish the damaged and cleaned place with a silk cloth.
to contents ↑

How to restore shine on linoleum?

During operation, linoleum that is not covered with carpet in a room or a corridor may lose its original luster. Repair immediately loses its novelty, and the floor begins to look dull. To restore the sparkling surface of the flooring, you should use simple recipes.

Method number 1:

  1. Mix milk and water in equal proportions.
  2. Wipe the floor with the resulting compound.
  3. Rub the coating with a special polish.

Method number 2

To give the linoleum shine, you can use the grandmother's method:

  1. Boil the potatoes until cooked and wait for it to cool.
  2. Wipe the floor with the resulting broth.
to contents ↑

Stock footage

In order to maintain the cleanliness of your flooring, it is not necessary to use complex components and spend a lot of time to eliminate them. Sometimes simple cleaning methods deal with the problem faster and more efficiently. The longevity of your linoleum directly depends on how you care for it. The tools and methods described in this article will certainly help to maintain the beautiful appearance of your floor for more than one year.

1 star2 Stars3 stars4 stars5 stars (No ratings yet)
Loading...

Report typo

Text to be sent to our editors:

Adblock detector

Wardrobe

Electronics

Wash